DK-104-S Stone Waterproofing Agent

This product is a high-performance protective agent specifically designed for stone materials. It employs active silicate-based penetration technology, enabling it to deeply penetrate the interior of the stone and form a stable, breathable, waterproof structure. While effectively preventing the infiltration of moisture, oil stains, and pollutants, it fully preserves the stone’s natural breathability and original texture, without affecting its color or grain pattern. It is suitable for both indoor and outdoor waterproofing, stain resistance, and anti-aging protection of various types of natural stone, artificial stone, and cultural stone, significantly extending the service life of the stone and enhancing its surface’s resistance to dirt and stains.

Core features

1. Deep-penetrating protection The active ingredients can penetrate the microscopic pores of the stone, forming a durable protective layer that bonds both internally and externally, ensuring long-lasting and stable waterproofing performance.

2. Breathable but waterproof Effectively prevents liquid water from entering while allowing water vapor to escape freely, thereby preventing moisture-induced lesions inside.

3. Stain-resistant and dirt-repellent Resists penetration by common oil stains, colored liquids, ink marks, and other contaminants, making daily cleaning even more convenient.

4. UV-resistant and weather-resistant It boasts excellent weather resistance and UV resistance, making it suitable for long-term outdoor exposure to sunlight and rain.

5. Maintain the stone’s appearance Colorless and transparent, it does not alter the stone’s original color, texture, or luster, while enhancing visual depth.

6. Environmental protection and safety After drying, the product becomes neutral and is harmless to both humans and the environment. It is suitable for a variety of indoor and outdoor applications.

7. Convenient construction Supports brushing, rolling, or low-pressure spraying; dries quickly and requires no complicated processes.

Scope of application

1. Natural stone types Marble, granite, sandstone, slate, limestone, and others

2. Artificial stone products Artificial stone, quartz stone, microcrystalline stone, artificial cultural stone, etc.

3. Applicable Scenarios : Curtain wall cladding, floor paving, countertops, staircases, sculptures, garden stones, interior decorative surfaces, and more.

User Guide

1. Substrate Treatment Ensure that the stone surface is clean, dry, free of oil stains, wax, and other coatings. If there are cracks or holes, it is recommended to first treat them with a specialized stone repair compound.

2. Environmental conditions It is recommended to carry out construction in environments with temperatures above 5℃ and relative humidity below 85%, and to avoid working during rainy days, high-temperature conditions, or strong winds.

3. Construction Method

It is recommended to apply the product evenly using a soft-bristle brush, roller, or low-pressure spray gun.

During construction, avoid liquid accumulation and ensure the surface is thoroughly wetted.

It is generally recommended to apply two coats, with the second coat applied after the first coat has surface-dried (adjust according to the substrate’s absorption rate).

4. Drying and curing After construction, allow natural curing for 24–48 hours, during which time avoid contact with water, dust, and contaminants. Once fully cured, it can be used normally.

Precautions

Before construction, it is recommended to conduct a small-scale test in an inconspicuous area to confirm the effectiveness and suitability.

When performing construction, please wear gloves and safety goggles to avoid contact with skin or eyes. If accidental contact occurs, immediately rinse with clean water.

Store in a cool, well-ventilated place, avoiding direct sunlight or high-temperature environments, and keep out of reach of children.

Suitable for stone surfaces that have fully cured or completed curing; not recommended for use on stone surfaces during the initial stage of wet-setting installation.